fundmedianet

DeWalt D25700 Information the information about the DeWalt D25700: Intro The DeWalt D25700 is a 12-volt cordless rotary hammer drill that is perfect for a variety of tasks around the home and on the jobsite. It is lightweight and easy to use, making it a great choice for both professionals and DIYers.

Hitachi SV 12SA Information The Hitachi SV 12SA is a single-speed orbital finishing sander that is well-suited for a variety of woodworking tasks, including sanding between coats of finish, smoothing out rough edges, and removing paint. It features a 4.5-inch sanding pad that rotates back and forth at a speed of 14,000 orbits per minute, providing a smooth, even finish. The sander is also equipped with a dust collection system that helps to keep your work area clean. Image of Hitachi SV 12SA Specifications

MacAllister MCS2400 Information The MacAllister MCS2400 is a 18" (45cm) chainsaw that is designed for both home and professional use. It features a powerful 2400W engine that delivers up to 2.8HP, making it capable of handling even the toughest cutting tasks. The chainsaw also features a low-vibration design that helps to reduce fatigue, making it easier to use for extended periods of time. Here is an overview of the MacAllister MCS2400's specifications: Engine: 2400W Power: 2.8HP Bar length: 18" (45cm) Chain speed: 20m/s Fuel tank capacity: 550ml Oil tank capacity: 260ml Weight: 7.5kg

Amprobe 37XR-A Information The Amprobe 37XR-A is a digital multimeter that is perfect for electricians, technicians, and hobbyists. It features a large, backlit display that makes it easy to read in any lighting condition. The 37XR-A also has a variety of features that make it a versatile tool, including a True RMS measurement, a data hold function, and a min/max function. Image of Amprobe 37XR-A digital multimeter Here is a table of the full specifications of the Amprobe 37XR-A:

Einhell GC-PH 2155 Information The Einhell GC-PH 2155 is a powerful, robust petrol hedge trimmer that is ideal for independent maintenance of hedges, shrubs, and other vegetation. It features a low-vibration two-stroke engine that provides plenty of power to cut even tough branches and knots. The rotatable hand grip and additional handle allow for ergonomic operation in any cutting situation. Image: Full specifications:

Gossen Metrawatt ENERGYMID EM2387 Information The Gossen Metrawatt ENERGYMID EM2387 is a multifunction energy meter that is designed for use in 3-wire systems. It has a wide range of features, including: 4 quadrant measurement for both energy import and export Measurement of THD for current and voltage, as well as neutral conductor current IN Up to 8 tariffs Communication via M-Bus, LON, Modbus TCP / BACnet, Modbus RTU, or Impulsausgang Ultra-compact 4 TE (72 mm) housing Integrated error detection The ENERGYMID EM2387 is a versatile and powerful energy meter that is ideal for a wide range of applications. It is suitable for both industrial and commercial use, as well as for household use with highly demanding requirements. Image:

ATIKA ASP 8 N-2 Information The ATIKA ASP 8 N-2 is a powerful and versatile electric wood splitter that is perfect for homeowners and small businesses. It features a 8-tonne splitting force, which is more than enough to split even the toughest of logs. The ASP 8 N-2 also has a number of safety features, including a two-hand safety switch and a load-sensing motor, which help to prevent accidents. Image of ATIKA ASP 8 N-2 wood splitter Here is a table of the full specifications of the ATIKA ASP 8 N-2:

Metrel MD 9040 Information The Metrel MD 9040 is a TRMS industrial digital multimeter that is designed for use in demanding applications. It features a CAT IV / 1000 V overvoltage category, which means that it can be used safely in environments where there is a risk of high voltages. The MD 9040 also has a number of other features that make it well-suited for industrial use, including: A large, bright 4-digit 9999 counts dual LCD display that is easy to read in any lighting condition. A wide range of measurement functions, including AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, diode test, and continuity. Auto-ranging and manual ranging capabilities. A relative zero mode for comparing the difference between two signals. A data hold feature that freezes the display for later viewing. PC Link functionality for downloading test results to a computer. A safety enclosure that meets IP65 ingress protection standards. The Metrel MD 9040 is a versatile and power...

Black & Decker 7434 Information The Black & Decker 7434 Detail Finish Sander is a small, lightweight power sander that is perfect for getting into tight spaces and finishing projects. It has a variable speed control, so you can adjust the speed to the task at hand, and a dust collection system that helps to keep your work area clean. Introduction The Black & Decker 7434 Detail Finish Sander is a great tool for anyone who needs to sand in tight spaces or get a smooth finish on a project. It is lightweight and easy to use, and the variable speed control makes it easy to adjust the speed to the task at hand. The dust collection system also helps to keep your work area clean.

Craftsman CMCS350 Information The Craftsman CMCS350 is a 20-volt max variable speed brushless cordless reciprocating saw. It features a brushless motor that provides up to 75% more power than a comparable brushed motor. The saw also has a variable speed trigger for added control, a tool-free blade release for quick and easy blade changes, and a LED light to illuminate the work area. Image of Craftsman CMCS350 Reciprocating Saw Specifications

Leatherman Style Free Information the Leatherman Style Free information: Intro The Leatherman Style Free is a compact multi-tool that's perfect for everyday carry. It's small enough to fit in your pocket or purse, but it has 12 tools that can handle a variety of tasks. Whether you're fixing a bike, opening a package, or just need a pair of scissors, the Style Free has you covered.

Parkside PDSSA 18 A1 Information The Parkside PDSSA 18 A1 is a cordless impact driver that is part of the Parkside X20V Team range of power tools. It is powered by an 18V lithium-ion battery and has a maximum torque of 180Nm. The impact driver is equipped with a two-speed gearbox, which allows it to be used for a variety of applications, from light-duty screwdriving to heavy-duty fastening. Image Specifications

Kyoritsu KEW 2003A Information The Kyoritsu KEW 2003A is a digital clamp meter that can measure both AC and DC current up to 2000A. It has a large LCD display with a backlight for easy viewing in dark environments, and it features a variety of safety features to protect the user, including an overvoltage protection circuit and a ground fault indicator. Here are the full specifications of the Kyoritsu KEW 2003A:

DeWalt DW359 Information The DeWalt DW359 is a 7-1/4 inch, 15 amp circular saw that is designed for professional use. It features a powerful motor that delivers up to 5,500 RPM, making it ideal for cutting through a variety of materials, including wood, plastic, and metal. The saw also has a lightweight design that makes it easy to maneuver, and a durable construction that can withstand the rigors of everyday use. Here are the full specifications of the DeWalt DW359:

Bosch GWS 11-125 CIE Professional Information the information on the Bosch GWS 11-125 CIE Professional angle grinder: Introduction The Bosch GWS 11-125 CIE Professional is a powerful and versatile angle grinder that is perfect for a variety of tasks, including cutting, grinding, and polishing. It features a 11 amp motor that delivers up to 12,500 RPM, making it one of the most powerful angle grinders in its class. The GWS 11-125 CIE also features a comfortable grip and a lightweight design, making it easy to use for extended periods of time.

YSI EXO3 Information The YSI EXO3 is a multiparameter water quality sonde that is purpose-built for monitoring major water quality parameters, including pH, conductivity, temperature, turbidity, and dissolved oxygen. It is a versatile instrument that can be used in a variety of applications, such as: Continuous monitoring: The EXO3 can be deployed in a water body for extended periods of time to collect data on water quality trends. Spot sampling: The EXO3 can also be used to collect water quality data at specific locations or times. Buoy integration: The EXO3 can be integrated with a buoy to provide long-term, remote monitoring of water quality. Aerial drone deployment: The EXO3's small size and light weight make it ideal for deployment from an aerial drone. The EXO3 is equipped with a number of features that make it a reliable and accurate water quality sonde, including: Smart sensors: The EXO3's sensors are self-calibrating and self-cleaning, which helps to ensure accura...

Makita BDF454 Information The Makita BDF454 is a cordless drill designed for use in a variety of applications. It is powered by an 18V LXT lithium-ion battery and has a maximum torque of 80 Nm. The drill is compact and lightweight, making it easy to maneuver in tight spaces. It also features a two-speed gearbox and a reversible chuck, making it versatile for a variety of drilling and driving tasks. Image of Makita BDF454 drill Here are the full specifications of the Makita BDF454:

Stihl HSA 56 Information The Stihl HSA 56 is a lightweight, cordless hedge trimmer that is perfect for trimming hedges, shrubs, and small trees around the home. It is powered by a 36-volt lithium-ion battery, which provides up to 100 minutes of run time on a single charge. The HSA 56 has a cutting width of 45 centimeters, and its double-sided blades can cut through branches up to 1.5 centimeters thick. Image of Stihl HSA 56 hedge trimmer Specifications

Husqvarna 536Li XP Information The Husqvarna 536Li XP is a high-performance, lightweight battery-powered chainsaw designed for professionals who need a powerful and versatile tool. It features a brushless motor that delivers up to 3.5 horsepower, which is equivalent to the power of a 25cc petrol chainsaw. The 536Li XP also has a number of features that make it easy to use and maintain, including an intuitive key pad, a savE™ mode that conserves battery life, and a low-emission engine. Image of Husqvarna 536Li XP chainsaw Specifications

ABB CMS-700 Information the information about the ABB CMS-700: Introduction The ABB CMS-700 is a circuit monitoring system that enables detailed monitoring of energy consumption of up to 96 sensors (96 single-phase or 32 three-phase lines or a mix of the two up to the limit of 96 sensors). It is a versatile and efficient solution, which can be integrated into already wired panels.

DeWalt DWE43131 Information the information about the DeWalt DWE43131 angle grinder: Introduction The DeWalt DWE43131 is a 4.5-inch/5-inch angle grinder that is designed for heavy-duty use. It features a powerful 13-amp motor that delivers up to 11,000 RPM, as well as E-Clutch® technology that helps to prevent damage to the tool in the event of a wheel bind or stall. The DWE43131 also includes a Dust Ejection System that helps to keep the work area clean.

Festool PLANEX LHS-E 225 Information The Festool PLANEX LHS-E 225 is a long-reach wall sander that is designed for fast, efficient, and easy sanding of walls and ceilings. It features a brushless EC motor that is maintenance-free and provides up to 50% longer runtime than comparable sanders. The PLANEX LHS-E 225 also has a unique telescoping arm that allows you to reach up to 12 feet, making it ideal for sanding high ceilings and large areas. Image: Full specifications:

Kyoritsu KEW2200 Information The Kyoritsu KEW2200 is a compact and lightweight AC digital clamp meter that is ideal for a variety of electrical troubleshooting and maintenance applications. It features a large, backlit display that makes it easy to read readings in any lighting conditions, as well as a variety of measurement functions, including AC and DC current, voltage, resistance, capacitance, frequency, and duty cycle. The KEW2200 also has a built-in NCV (non-contact voltage) detector that allows you to quickly and safely identify the presence of live voltage without the need to make contact with the circuit. Here are the full specifications of the Kyoritsu KEW2200:

Fellowes Halo A4/95 Information The Fellowes Halo A4/95 is a compact and user-friendly laminator that is perfect for home and office use. It can laminate documents up to 9.5 inches wide, and it supports both hot and cold lamination. The laminator features InstaHeat technology for rapid one-minute warm-up, AutoSense technology for automatic pouch thickness detection, and a release lever for easy pouch re-centering and removal. It also has a Jam Release Button, Reverse Function, and Auto-Reverse for easy troubleshooting of jams. The laminator is safe to use, with HeatGuard Technology that keeps the heat contained inside the machine. Here is a table of the full specifications of the Fellowes Halo A4/95: Feature Specification Type Cold/hot laminator Maximum lamination width 241.3 mm (9.5 inches) Preheating time 1 minute Lamination speed 304.8 mm/minute (12 inches/minute) Pouch thickness 3 mil, 5 mil, or cold Temperature settings 3 AutoSense technology Yes InstaHeat technology Yes Release l...

Bosch GSA 18V-32 Information The Bosch GSA 18V-32 Professional is a cordless reciprocating saw that offers the ideal combination of high power and comfortable handling. It is powered by a brushless motor that delivers corded power with cordless freedom. The saw also features a unique, ergonomically shaped handle and extra-long switch for more control in difficult work situations. Here is a table of the full specifications of the Bosch GSA 18V-32 Professional:

Cotech Z1J-TD10-13E Information the information about the Cotech Z1J-TD10-13E tablet computer: Introduction The Cotech Z1J-TD10-13E is a high-performance tablet computer that is perfect for both work and play. It features a powerful Intel Core i5-1240P processor, a large 13.3-inch IPS LCD display, 16GB of RAM, and a 512GB SSD. The Z1J-TD10-13E also has a long battery life of up to 10 hours, making it a great choice for users who are always on the go.

DeWalt DC616K Information The DeWalt DC616K is an 18-volt cordless straight finish nailer that is designed for a variety of woodworking applications, including trim work, cabinetry, and furniture building. It features a sequential operating mode for precision placement, an easy jam removal system, and a 6-position dial that allows users to move between applications without resetting depth. Here is a table of the full specifications of the DeWalt DC616K:

Craftsman CMCS650 Information The Craftsman CMCS650 is a cordless jig saw that uses a 20V Max brushless motor for powerful performance and longer runtime. It has a variable speed trigger that allows you to adjust the blade speed from 0 to 3,200 SPM, and three orbital settings for different types of cuts. The saw also features a 45° bevel capacity and a soft grip handle for comfort and control. Here is an overview of the Craftsman CMCS650's specifications: Specification Value Motor 20V Max brushless No-load speed 0-3,200 SPM Orbital settings 3 (plus Off) Bevel capacity 45° Weight 4.1 lbs. Dimensions 13.2 x 6.7 x 5.3 in. Battery compatibility V20

Einhell TE-HA 18 Li Information The Einhell TE-HA 18 Li is a cordless hot air gun that is part of the Power X-Change family of tools. It is a powerful and versatile tool that can be used for a variety of tasks, including: Shrinking heat shrink tubing Removing paint and adhesives Bending and shaping plastics Soldering and desoldering electronic components Removing rust Priming and painting The TE-HA 18 Li has two temperature settings, 350°C and 550°C, which can be selected using the LED display. It also has a built-in overheat protection feature to prevent damage to the tool. The TE-HA 18 Li is powered by a 18V Power X-Change battery, which can also be used to power other tools in the Power X-Change range. The battery is not included with the tool, but can be purchased separately.

Einhell TE-CD 18 Li Information The Einhell TE-CD 18 Li is a powerful and versatile cordless drill driver that is part of the Power X-Change family. This means that it can use the same batteries as all of Einhell's other Power X-Change tools, so you can save money by buying just one battery and charger. The TE-CD 18 Li has a powerful 18V motor that can deliver up to 35Nm of torque, making it ideal for a variety of tasks, from light drilling and screwing to heavy-duty jobs. It also has a two-speed gearbox that allows you to choose the right speed for the job at hand, and an electronic torque preselection dial that lets you adjust the amount of torque for precise drilling and screwing. The TE-CD 18 Li comes with a 13mm quick-release chuck for fast and easy bit changes, and it also has a built-in LED light that illuminates your work area. The drill is also ergonomically designed with a soft-grip handle for comfortable use, and it has a belt clip for easy carrying.

Bosch GKP 200 CE Professional Information The Bosch GKP 200 CE Professional is a high-performance hot glue gun that offers a combination of power, flexibility, and ease of use. It features two electronically controlled heating elements that provide a fast heat-up time of just 4 minutes, as well as a constant working temperature for consistent results. The glue gun also has a removable cable for cordless operation, which gives you more freedom of movement when working. Here is an overview of the Bosch GKP 200 CE Professional's specifications: Power: 200 watts Heat-up time: 4 minutes Working temperature: 190-210 degrees Celsius Glue output: 30 grams per minute Cable length: 3.5 meters Weight: 0.7 kilograms Features

Craftsman CMEW400 Information the information about the Craftsman CMEW400 oscillating multi-tool: Introduction The Craftsman CMEW400 is a 3-amp oscillating multi-tool kit that comes with 14 different attachments. It has a variable speed dial that ranges from 10,000 to 22,000 oscillations per minute (OPM), so you can adjust the speed to the specific task you are working on. The tool also has a tool-free accessory change system, so you can quickly and easily switch out attachments without having to use any tools.

Tanaka TEA-500 Information The Tanaka TEA-500 is a professional-grade two-person auger that is designed for heavy-duty use. It features a powerful 50cc engine that can easily handle even the toughest soils. The auger bit is made from high-quality steel and has a sharp cutting edge that makes quick work of digging holes. The TEA-500 also comes with a number of features that make it easy to use and maintain, such as a comfortable handle, an adjustable depth rod, and a built-in oiler. Specifications